Industrial Gates DPU, SPU, APU, FST, etc.

Sectional doors open vertically and thus provide free space in front of and behind the gates. The gate sections are folded in a plane under the ceiling, vertically above the opening or on an inclined plane parallel to the overlap.

• SPU - double-walled gates with steel sections filled with polyurethane foam are available in versions with a construction depth of 42 mm or with thermal separation sections with a construction depth of 67 mm. The gates in both cases have 100% the same appearance.
• APU - glazed aluminum gates with a steel section of the base with a foam polyurethane filling are available in versions with a construction depth of 42 mm or with sections with thermal separation with a construction depth of 67 mm.
• ALR - glazed aluminum gates with polyurethane foam filling are available in versions with a construction depth of 42 mm or with thermal separation sections with a construction depth of 67 mm.
• DPU - gates with double thermal insulation are used for rooms with large temperature differences. Gates with a section thickness of 80 mm perfectly separate rooms with different temperature conditions. The outer and inner walls of the sections are separated by thermal insulation, and in addition, the gate leaf has a double seal at the top and bottom, which saves electricity.

Speed gates are used as internal and external fences to optimize traffic flows, to improve indoor microclimate and to reduce energy consumption.

Roller gates and grilles made of aluminum and steel are, thanks to their simple design with a relatively small number of components, a cost-effective solution. This option of closing openings again and again proves its effectiveness in daily operation. Roll gates and roll bars do not require a large space above the opening. The shell of the gate is compactly wound on the shaft behind the jumper. Thus, valuable space is not lost on the sides and in the ceiling area.

• SB provides easy control of gates installed in industrial workshops and workshops, in warehouses or in agricultural buildings.
• TGTs are designed to provide a high level of security when locking underground garages and multi-storey parking lots.
• DD - large-sized gates for industrial workshops and waste processing and disposal enterprises.
• Plastic with ZAK system (optional) are closed more hermetically and thus reduce heat loss. The ZAK system shifts the roll on the consoles and directs the roll web precisely so that it always enters the guide rails vertically. As a result, the canvas wears out more slowly, and the gates open and close almost noiselessly.

The gates for collective garages practically do not require maintenance, the gates are easy to open and close, the gate moves silently and safely thanks to the wear-resistant technique of using counterweights.
The robust design of the gate provides for individual design options, various types of panels, for example, in the form of a perforated sheet, sections, or panels installed by the customer.

• N 500 - lifting and turning gates, can be used both in the private sector for garages with two parking spaces, and for collective garages with a maximum of 25 parking spaces.
• ET 500 is a lifting and turning gate that extends when opening and closing by no more than 40 mm. Therefore, they are optimally suited for collective garages, even if people often walk by.
• ST 500 is a sliding gate, the feature of which is a small installation depth in the jumper area.

Fire-resistant sliding gates FST are reliable, adequate and safe gates corresponding to specific operational conditions at the facility, in single- and double-leaf versions. Fire-resistant structures have been tested in accordance with the DIN 4102 standard.

Ribbon curtains are especially recommended for inexpensive hermetic closure of large openings in hangar-type buildings. Wear-resistant PVC strips are tightly closed and open only to the width of the vehicle or cargo. Due to this, temperature losses are minimized even with intensive through traffic. The excellent transparency of flexible plastic curtains improves the level of illumination and reduces lighting costs. Suitable for use in the food or pharmaceutical industry, including in low-temperature areas.

Pendulum gates are provided for use as internal fences in the areas of operation of forklifts in normal mode. In order to carry out a simple installation, the pendulum gates are supplied fully pre-assembled. The gate should be twice as wide and 500 mm higher than the transport cargo.

• PFT - flexible pendulum gates are designed for indoor use during normal operation of forklift trucks. They are delivered in pre-assembled condition, which greatly simplifies the installation of these gates.
• SVF - are advantageous in price and are the best suited for large openings in industrial premises. Durable PVC strips provide a tight closure. They open only to the width of the vehicle passing through them or to the width of the cargo.

DOCUMENTATION

• SPU, APU, ALR (construction depth 42 mm). Technical data for installation.
• SPU, APU, ALR (construction depth 67 mm). Technical data for installation.
• DPU. Technical data for installation.
• Speed. Technical data for installation.
• SB, TGT, DD. Technical data for installation.
• Classic. Technical data for installation.
• FST. Technical data for installation.